Reference Projects

Oil & Gas

GRAIN LNG (UK): Provision of engineering design services to National Grid Grain LNG. Services include various conceptual design studies involving gas and LNG filtration, control of boil-off gas (ground flaring, HP compression), pressure reduction equipment, and LPG storage.

TAQA (Netherlands): Conceptual Design of the Bergermeer gas storage project for TAQA. The depleted gas field is located near Almaar, The Netherlands, and has a capacity of 3,200 M m3. This is approximately the same size as the UK's offshore Rough facility, which is the largest gas storage facility in the UK.  To the left is a picture of TAQA's existing PGI facility (with a capacity of 500M m3).

VIKING GAS (UK): Provision of engineering design services for the debottlenecking and future expansion of the Knapton Power Generation Plant.

NATIONAL GRID GAS (UK): EPC ITT (Engineering, Procurement & Contracting Invitation To Tender) preparation and numerous miscellaneous compressor station studies and surveys, involving the compressor stations such as Aberdeen, Bishop Auckland, Cambridge, Carnforth, Diss, Kirriemuir, Kings Lynn, Lockerley, Nether Kellet, etc.

SCOTTISH & SOUTHERN ENERGY (UK): Best Available Technology (BAT) assessment and subsequent FEED for the replacement of the glycol dehydration trains at Atwick, the largest onshore gas storage facility in the UK. Project included full specification of a standalone Silca Gel gas dehydration plant.

WARWICK ENERGY (UK): Project definition and FEED (Front End Engineering Design) scopes of work for an onshore underground gas storage facility development at Caythorpe, East Yorks.  Depleted gas reservoir with a capacity of 200M m³.

Subsequent work included Project Management Consultancy (PMC) services to the customer.

NATIONAL GRID GAS (UK): Emissions Reduction Project feasibility studies at Hatton, Huntingdon, Peterborough and Carnforth Compressor Stations. Goal to replace GT’s with electrical variable speed machines to reduce NOx emissions.

BROVIG (UK): Primary engineering design study investigating the addition of gas compression, power generation and simultaneous water and gas (SWAG) injection to the off-shore Crystal Ocean FPSO.

MOUCHEL (KUWAIT MAA REFINERY): Conceptual design and FEED for the topside facilities of a new 2.2km jetty in Kuwait.   Facilities consisting of loading/unloading equipment (pumps, pipelines, metering, loading arms) for 22 products, including crude oil, LPG, fuel oils, gasoline, etc.

SHELL (SPDC): Production of a detailed piping model for a gas dehydration module utilising Twister technology. The unit is for the Okoloma gas plant in Nigeria.

NATIONAL GRID LNG STORAGE: Technical audits for the LNG storage facilities at Partington, Avonmouth, Dynevor Arms and Glenmavis to ensure ‘as-built’ status of key operational documentation.

SHELL EPDC(NIGERIA): Conceptual design and project specification for the Otumara Associated Gas Gathering Node which collects associated gas from 4 flow stations in the area. The project is a key part of SPDC's target of eliminating flaring by 2008.

PRECISION DRILLING, NORTHLAND (UK): Mechanical and process design surfaces for an off-shore surface separation package relating to an under-balanced drilling application (feed 50 MMScfd gas - at 5,000 psi - and 15,000 bbl/d)

THE OIL PIPELINE AGENCY (UK): Design and project management of two new pump stations at Calne and Berwick Wood including two 1.2 MW pumps for transfer of aviation grade kerosene.