Turbo Compressor Repair

Turbo Compressor Repair

Turbo Compressor Repair Services

Stork offers complete maintenance, repair and overhaul for Turbo Compressors. We combine our in-depth compressor knowledge with in-house engineering capability. We are your partner for flexible repair solutions with a short lead-time. In our well-equipped turbomachinery workshops we perform advanced repair methods on your Turbo Compressor.

Types of Repair

Turbo Compressor repairs performed by Stork include;

  • Modification
  • Reverse engineering
  • Refurbishment
  • Coating
  • Erosion repair by Laser welding
  • Rotor and Stator Re-blading
  • Rotor inspection & repair
  • Component manufacturing / spare parts
  • Split surface flatness repair
  • Rotor balancing
  • Numerical simulation (CFD, FEM)

Axial Radial Compressor repair

Coating of compressors

Compressor coating

We offer the following coatings for your Turbo Compressor:

  • Short term wax coating for protection against corrosion
  • Water based coating with a standard corrosion inhibitor on the basis of REDNOX. Mainly used in Air Turbo Compressors
  • 2-component cold coatings. Epoxy based coating that doesn’t need to be baked into the surface of the material
  • Cold coating containing ceramic elements, baked into surface at operating temp. above 120°C.
  • A polymer based coating in an epoxy base material which is baked at 300-500°C. Chemically resistant between a PH of 2 – 14 temperature stable between -100°C and 180°C
  • A duroplast based coating that is baked at around 300°C. Chemically resistant between a PH of 1- 13, temperature stabile between -100°C and 230°C

Repair by laser welding

This method will fill up the grooves and create a constant bond between the base material and the welding material. The repair procedure is done with a very low power level, which keeps the base material from getting affected by heat. The power can be this low, because the laser has a very small area where it melts the welding material to the base material.

This repair technique is applied on the following components e.g.

  • Inner Casings
  • Stuffing Boxes
  • Couplings
  • Impellers
  • Vanes

Compressor repair

Turbo Compressor Brands Serviced

As an independent service provider we provide multi-brand MRO services, for example for turbo-compressors of

  • Atlas Copco
  • BBC
  • Boldrocchi
  • Borsig
  • Cameron
  • Cooper
  • Cryostar
  • DeLaval
  • Demag
  • MHI
  • Nuovo Pignone (GE)
  • Piller
  • Schiele
  • Siemens
  • Sulzer (Escher Wyss)
  • York

Contact us