Advantage 3, 6 Channel Programmer / Controller
The Stork Cooperheat, 6 Channel programmer / controller has been developed for use in conjunction with any Transformer Power units, which have contactor control sockets, providing automatic temperature process control for up to six Transformer Unit output channels.
Part no.12210
Product detail
Product specifications
Description
The Stork Cooperheat, 6 Channel programmer / controller has been developed for use in conjunction with any Transformer Power units, which have contactor control sockets, providing automatic temperature process control for up to six Transformer Unit output channels.
Stork Cooperheat’s Advantage3 temperature programmer / controller with its unique linkable control zone feature, is fast becoming the heat treatment industry standard. Providing the user with versatility, flexibility, cost savings and time. The Advantage 3 can be used individually or combined to control temperature differentials in a number of user selectable configurations. This control of temperature differential is an important requirement of international heat treatment codes and standards including ASME, BS, EN, ANSI & DIN.
Specifically designed for localised heat treatment industry, the Advantage 3 reduces the number of standard six channel (single program) programmers normally required to heat treat work pieces requiring different heat treatment cycles and where only one standard six channel (single program) programmer is available, eliminates the need for multiple shift working to carry out several separate heat treatment processes for each heat treatment specification.
Stork Cooperheat’s Advantage3 temperature programmer / controller with its unique linkable control zone feature, is fast becoming the heat treatment industry standard. Providing the user with versatility, flexibility, cost savings and time. The Advantage 3 can be used individually or combined to control temperature differentials in a number of user selectable configurations. This control of temperature differential is an important requirement of international heat treatment codes and standards including ASME, BS, EN, ANSI & DIN.
Specifically designed for localised heat treatment industry, the Advantage 3 reduces the number of standard six channel (single program) programmers normally required to heat treat work pieces requiring different heat treatment cycles and where only one standard six channel (single program) programmer is available, eliminates the need for multiple shift working to carry out several separate heat treatment processes for each heat treatment specification.
Specifications
CONTROL
Proportional Band: ± 5°C (10°F) / ± 10°C (20°F) / ± 20°C (40°F) / ± 40°C (80°F)Hold Back Setting: 10°C (20°F) / 20°C (40°F) / 40°C (80°F) / 60°C (120°F)
POWER INPUT
Supply Voltage: 110/115 V a.c.Frequency: 50/60 Hz
SIGNAL OUTPUT
Type: Thermocouple Type K (NiCr/NiAl)Range: 0 to 1200°C (0 to 2200°F)
ACCURANCY
Measurement: ± 0.3°C (0.6°F)Linearity: Better than ± 0.5°C (1°F) at any point
Calibration: ± 1 display digit (Uncertainty: 1 display digit)
PROGRAMMABLE VALUES
Start Temperature: °C or °F temperature uncontrolled up toRate of Rise: °C or °F per hour
Soak Temperature: °C or °F temperature to soak (hold) at
Soak Time: Time (hours:minutes) held at soak (hold)
Rate of Fall: °C or °F per hour
Off Temperature: °C or °F temperature uncontrolled down from
ENVIRONMENTAL / SAFETY
Normal Operating Temperature range: -10 to 55°CStorage Temperature: 10 to 90% Relative Humidity
Ambient Humidity: EMC: EN 61326 : 1998
CE Compliance: LVD: EN 61010-1 : 2001
| Category | HT Programmers & Controllers |
|---|---|
| # Channels | 6 |