Advantage 3 Programmer/Controller HT Unit Upgrade Kit

This upgrade kit contains the necessary parts and instructions required for upgrading any (six channel) make or model of heat treatment unit to provide the additional functionality
Advantage 3 Programmer/Controller HT Unit Upgrade kit by Cooperheat - parts and instructions required for upgrading any (six channel) make or model of heat treatment unit to provide the additional functionality

DESCRIPTION

Contains the necessary parts and instructions required for upgrading any (six channel) make or model of heat treatment unit to provide the additional functionality, user benefits and cost savings provided by the ‘Advantage 3’ linkable programmer/controller.

SPECIFICATIONS

Control

  • Proportional Band: ± 5°C (10°F) / ± 10°C (20°F) / ± 20°C (40°F) / ± 40°C (80°F).
  • Hold Back Setting: 10°C (20°F) / 20°C (40°F) / 40°C (80°F) / 60°C (120°F).

Power input

  • Supply Voltage: 110/115 V a.c.
  • Frequency: 50/60 Hz.

Signal output

  • Type: Thermocouple Type K (NiCr/NiAl).
  • Range: 0 to 1200°C (0 to 2200°F).

Accuracy

  • Measurement: ± 0.3°C (0.6°F).
  • Linearity: Better than ± 0.5°C (1°F) at any point.
  • Calibration: ± 1 display digit (Uncertainty: 1 display digit).

Programmable values

  • Start Temperature: °C or °F temperature uncontrolled up to.
  • Rate of Rise: °C or °F per hour.
  • Soak Temperature: °C or °F temperature to soak (hold) at.
  • Soak Time: Time (hours:minutes) held at soak (hold).
  • Rate of Fall: °C or °F per hour.
  • Off Temperature: °C or °F temperature uncontrolled down from.

Environmental/safety

  • Normal Operating Temperature range : -10 to 55°C.
  • Storage Temperature: 10 to 90% Relative Humidity.
  • Ambient Humidity: EMC: EN 61326:1998.
  • CE Compliance: LVD: EN 61010-1:2001.
  • Enclosure IP rating: Front: IP 64.
  • Enclosure IP rating: Rear: IP 20.
  • Panel Cut-out: 45mm +0.6 x 92mm +0.8.

Interested in this product?

Let's have a talk! Our experts take the time to discuss your existing challenges and help you make smart decisions that best meet your needs.

Get in Touch