Non-Destructive Testing - Conductor Inspection & Cleaning

Workscope

Stork was challenged to inspect and clean a 144 meter long conductor on a North Sea offshore platform in December 2014. The objective was to evaluate the condition of the conductor to ensure its integrity and confirm its conformance with HSE legislative standards.

Solution

Stork’s Specialist Inspection team developed a bespoke solution to meet specific client requirements. High Pressure Water Jetting was carried out prior to inspection in order to remove marine growth from the conductor walls to better facilitate inspection readings. Due to the nature of the project, Ultrasonic Testing equipment was used to deliver the inspection. The ultrasonic testing technology provided wall thickness readings for the full length of the conductor in clear 2D imagery. Following inspection, the Stork team delivered a scope report in a timely manner and recommendations on how to extend caisson integrity were provided.

Results

Using a range of Inspection and Non-Destructive Testing equipment to carry out the inspection, Stork provided valuable information on the condition of the conductor. As a result, the Operator was satisfied that the platform conductor was in good condition and therefore no further inspection services or repairs were required on this scope, assuring integrity.

Project Information

Location UK North Sea
When December 2014
Time Frame Completed in 10 Days
Workscope Caisson cleaning and inspection services
Equipment High Pressure Water Jetting
Ultrasonic Testing inspection
Safety Project delivered with no lost time incidents and within budget
Benefits Bespoke service delivered
Quick scope completion
Long term cost savings
Efficient report turnaround
Recommendations delivered to improve integrity

Downloads

pdf Inspection__NDT_Conductor_Inspection_Case_Study 212 KB Download
Share this article