referencias de clientes
Regresar a Mercados y Referencias
Mantenimiento y reparaciones a la infraestructura de tubería - CENIT
Para este proyecto Stork ejecuta obras de mantenimiento de la infraestructura que hace parte de las líneas de transporte de hidrocarburos, asegurando que el crudo de una importante zona del país sea transportado sin interrupciones.
Drone inspection - leak identification
Stork utilized drone inspection to identify the location of an underside leak in a temporary safe refuge and reduced the Client’s scaffolding costs by approximately 90%.
Operación y Mantenimiento - centros de generación - Ecopetrol
Garantizamos la disponibilidad, confiabilidad y eficiencia de la capacidad instalada en Termocoa y Temosuria, térmicas de la Empresa colombiana de petróleos ECOPETROL), a fin de contribuir con la optimización en generación de energía que soporta los proyectos petroleros.
Soluciones de Gestión de Activos - Perú eléctrica planta
El cliente presentaba una creciente demanda de generación eléctrica y necesitaba optimizar sus costos operativos. Asimismo, contaba con equipos longevos los cuales no producían la generación deseada y además presentaban un alto riesgo para la operación.
DSM Key Supplier Management Award
Stork was contracted by a major North Sea operator to provide full flange management services during a 60 day TAR / Outage campaign. The challenge was to complete the campaign incident free with ‘Target Zero Leaks’ on N2 testing and avoid any re-tests.
Caisson cleaning & inspection
Stork was contracted by a major Operator to deliver a full caisson cleaning and inspection workscope on a platform in the UKCS. The workscope required Stork to deliver bespoke Remote Visual Inspection (RVI) and Ultrasonic Wall Thickness Mapping.
Rope access - GLT-PLUS
Stork's rope access solutions reduced a project lead time for NAM by 25%, compared with a traditional scaffolding approach. Utilising rope access also significantly reduce the risk on the project.
Hot Bolt Clamp - Onshore Gas Processing Plant
A client had corroded studbolts on live pressure vessel flanges in its onshore gas processing facility. Stork recommended that its patented Hot Bolt Clamp (HBC) technique be applied, allowing it to remove and replace the bolts while the plant was still in production.
Rope access inspection - Ecopetrol
The client’s new refinery could not be commissioned until a pressure loss issue in the gas supply line to the flare pilot flame was resolved. Stork mobilised a multi-disciplined rope access team and quickly identified and remedied the issue through an inspection and testing program.
Hot Bolt Clamp & Rope Access - North Sea
Stork was contracted by a major North Sea Operator to survey the corrosion of flange bolting at height. Stork deployed a rope access team for access, with the flanges and the bolting quickly and safely replaced using the Hot Bolt Clamp, all while the system remained online.
Heat Treatment Services - TAQA
Stork were initially contracted to provide two separate workscopes prior to a planned shutdown on TAQA’s North Cormorant. This included, heat treatment to nozzles on a vessel and the application of pre and post heat treatment to pipework.
Caisson Inspection & Composite Repair
Stork's carried out two caisson inspection and cleaning projecs on a platform in the SNS. The first required no repairs, while the second was found to be in poor condition. As a result of this, Stork designed a Composite Repair solution which solution delivered an engineered repair with a 20 year li
Ecopetrol & Equion - Asset Management Solutions
Ecopetrol and Equion developed a strategy to improve their asset management (incl. O&G production and power generation) performance in the Casanare fields in Colombia whilst lowering costs by outsourcing these activities to Stork.
North Sea Operator - Specialist Cleaning
TEG Contactors are an important part of the Oil & Gas production process. Stork was approached to carry out a full internal recoat of the C-2001 TEG Contactor on a major North Sea operator's FPSO.
Gulf of Mexico Operator - Hot Bolt Clamp
A major operator in the Gulf of Mexico contacted Stork after identifying that flanges on menthol and portable water systems were suffering corrosion due to the surrounding marine environmental conditions.
AOD - North Sea FPSO 2009-2014
Stork completed 14 workscopes between 2009 & 2014 to complete online desanding on an FPSO’s First and Second Stage Separator (20-VA- 001 & 20-VA-002) using the state of the art, Advanced Online Desander (AOD) Skid.
NDT - Conductor inspection
Stork was challenged to inspect and clean a 144 meter long conductor on a North Sea offshore platform in December 2014. The objective was to evaluate the condition of the conductor to ensure its integrity and confirm its conformance with HSE legislative standards.
North Sea Operator - Extended reach breathing apparatus system (ERBAS)
Stork was approached by a major Operator to supply a complete breathing system for work required inside the platform leg on a North Sea asset.
Composite repair - Offshore UK wind farm
A supplier was asked by a client to develop a Composite Repair solution for an offshore UK wind farm, to minimise the damage being caused to boat landing bumpers by boat fender rubbing. Stork’s multi-skilled Composite Repair personnel were brought in to deliver the repair.
AVR - Steam Line & DH Exchange Station
During the processing of waste, heat is produced. AVR wanted to maximize the use of the heat by providing steam to the neighboring process installations, and district heating to large parts of Rotterdam. Therefore two projects were initiated. One to build a steam line, with condensate return line,
Hot Bolt Clamp - Oil Terminal
Stork was contacted with regard to the bolting on five 2” class 150 flanges at an oil terminal. The flanges were on the flare gas system and suffering from moderate corrosion due to the surrounding marine environmental conditions.
Heat Treatment Services - Hydroelectric
Stork Cooperheat constructed three large bifurcations as part of the last phase of the Cortes - La Muela Hydroelectric Power Plant. Each bifurcation required post weld heat treatment (PWHT) in order to provide the required mechanical properties.
Vessel clean, inspect and recoat - North Sea
Stork was contracted to provide equipment and manning to clean, inspect and fully recoat vessels as required on a North Sea Installation.
P&G Iams Europe BV - Maintenance Activities
Procter & Gamble has built a new production facility for the production of Eukanuba dog and cat food in 1998. The new built contract was awarded to Stork. The Eukanuba production facility needs intensive maintenance as governmental guidelines and regulations for feed production in
Hot Bolt Clamp - North Sea
Stork was contacted by a major North Sea operator to address issues regarding 1.5” class 300 flanges on a flare system.
Vessel management - North Sea
Stork were contracted to project manage Train 1 and Train 2 Outages along with the annual shutdown of three major North Sea assets offering a fully integrated service.
Multi-disciplined teams - North Sea
Stork were contracted to provide engineering, maintenance and modification workscopes for a major North Sea Operator, across all North Sea Assets and downstream businesses.
DSM Coating Resins
After several years of operation the DSM production facility was subject to increasing numbers of problems with the cooling water pumps. These were causing loss of essential production time. Stork was asked to increase the integrity of the pumps and at the same time to reduce the maintenance costs.
Wood Group PSN/Shell - PowerSleeve external cladding
Stork (Stork) was contracted by Wood Group PSN to reinforce the structural integrity of a two level module after severe corrosion was identified on Shell U.K.’s Brent Alpha installation. All four sides of the module showed severe corrosion and multiple through wall anomalies.
ROAV inspection - Shell Brent Delta
Stork, in conjunction with Cyberhawk, utilized a drone to inspect an offshore drilling derrick and, coupled with expert interpretation of the results, delivered overall project savings of £4.6 million.
SIL Compliance Dr. W. Kolb Netherlands B.V.
Recently the local governments have demanded BRZO enlisted companies, to quickly and explicitly, demonstrate and confirm, compliance to the strictest of regulations. This came as an unexpected challenge to Dr. W. Kolb Netherlands B.V.
Shell Sakhalin Natural Gas Plant
Commissioned by Shell, Stork prefabricated piping and skids for the Sakhalin-2 project. This project consisted the build of a natural gas plant on the Sakhalin Island in the Russian Far East. The project scope consisted of piping prefabrication and skid construction, including pai
Vopak Westpoort Tank Terminal
Commissioned by the Royal BAM Group, Stork did the prefabrication of crossheader modules, main headers and hook-up spools for the Vopak tank terminal at Amsterdam Westpoort. This project consisted of the prefabrication of 40 cross headers, 42 main headers and 380 hook-up spools.
Sea Invest Tank Terminal
Stork was commissioned to do the complete piping prefabrication for a new tank terminal with jetty in the harbour of Antwerp at quay 510. The entire project was tied to a severe milestone planning.
Shell Nelson - Hot Bolt Replacement Programme
Stork was contracted to carry out four bolt flange replacement on the Shell Nelson. Stork were also asked to carry out a pre-job survey on the platform to determine a fixed scope of work.
BP Andrew - Hot Bolt Replacement Programme
BP contracted Stork to carry out four boltflange replacement bolt programmeand this entailed using hydraulic clamps to change the bolts out on live systems. We found the attitude of the Stork technicians to be of an excellent standard. They displayed a safe and conscientious attitude towards the
Through the delivery of high profile relocation projects for the likes of Shell and DSM, Stork has over 20 years’ experience in managing the complete relocation of onshore production facilities.
Akzo Nobel maintenance outsourcing
At both Akzo locations, Stork has local workshops equipped with full range service technologies. In addition account- and plant management is organized in order to take care of mutual maintenance management and coordination with the customer.
DSM anti-infectives maintenance outsourcing
In 2001 DAI Delft initiated a maintenance outsourcing partnership with Stork and Spie, called DSC, for delivery of the engineering, construction and maintenance function at the DAI facility in Delft.
Change Management at BASF Antwerp
Change management: Implementing Asset management at the BASF Antwerp site in running business. The origin laid in the phrase: design and implement a maintenance strategy which results in the required availability at the lowest sustainable cost.
Change maintenance management - Sonac
Sonac is a main supplier of high quality proteins, fats and minerals of animal origin. The location in Vuren (82 employees), The Netherlands, is part of the VION Food Group. VION has over 26,000 employees and has a yearly turnover of €8.9 billion.
Performance improvement at Bavaria
As an improvement-driven company Bavaria sought ways to enhance their production line performance. Additionally Bavaria needed to implement and configure the SAP Plant Maintenance module.
Risers inspections - J-Tubes
Stork was contracted by a major North Sea operator to inspect four J-Tube risers located within a platform leg. The aim of the inspection was to evaluate the condition of the J-Tubes, in order to facilitate an extended platform life strategy.
NAM/Shell Offshore, Southern Sea, UK & Netherlands
Nederlandse Aardolie Maatschappij B.V. (NAM) and Shell UK (Shell) have jointly awarded an Integrated Services Contract (ISC) to service their facilities in the UK and Netherlands sectors of the Southern North Sea. The value of the seven year contract is approximately € 700 million.
Cogeneration plant - Singapore
This cogeneration plant with five direct-fired boilers is intended for burning various additional waste streams, partly gases and partly liquids. The customer had to reduce the emission levels to comply with the latest regulations. It also encountered heavy fouling and recurring boiler damage, resul